chassis nr

Project 49

Completed: 2018


Toyota Hilux with one and a half cabin. The length of the living unit is 3750 mm and the width is 1800 mm. The aluminium sub-frame, which is attached on springs to six existing chassis points, provides support for the the living unit.

chassis nr

For this project we used our extremely light honeycomb panels (30 mm), which were specially developed by Twiga. Seitz windows (700 x 500mm) with a door at the rear with a width of 700 mm and a height of 1200 mm. From the living unit a passage to the driver’s cabin.


A beautiful ARB winch bumper makes the tough vehicle even a bit tougher. On the inside: 2KW air heater with ring heating, Dometic two-burner gas stove. Solar panels power 2 Yellowtop batteries of 12 volts / 75 Ah. Complete electrical installation of Victron with a possibility for the correct input voltage in America. Superstructure + interior + installation, about 450kg.


Building method

This living unit stays under 3500 kilograms due to the aluminum cage and the lightweight panels. In addition, an aluminum subframe has been chosen, so that this living unit can also be used with only a B driving license.


Permissible weight in kg
Length living unit
3.237 mm
Width living unit
1.860 mm
Indoor height
1.420 mm / 1.900 mm

"*" geeft vereiste velden aan

Dit veld is bedoeld voor validatiedoeleinden en moet niet worden gewijzigd.

Deze website is (nog) niet geoptimaliseerd voor weergave in landscape modus.
Houd je mobiel rechtop om de staande modus te gebruiken.